QGIS API Documentation  3.37.0-Master (a5b4d9743e8)
Public Member Functions | Static Public Member Functions | Protected Member Functions | Protected Attributes | List of all members
QgsCurvePolygon Class Reference

Curve polygon geometry type. More...

#include <qgscurvepolygon.h>

Inheritance diagram for QgsCurvePolygon:
Inheritance graph
[legend]

Public Member Functions

 QgsCurvePolygon ()
 
 QgsCurvePolygon (const QgsCurvePolygon &p)
 
 ~QgsCurvePolygon () override
 
virtual void addInteriorRing (QgsCurve *ring)
 Adds an interior ring to the geometry (takes ownership) More...
 
bool addMValue (double mValue=0) override
 Adds a measure to the geometry, initialized to a preset value. More...
 
bool addZValue (double zValue=0) override
 Adds a z-dimension to the geometry, initialized to a preset value. More...
 
void adjacentVertices (QgsVertexId vertex, QgsVertexId &previousVertex, QgsVertexId &nextVertex) const override
 Returns the vertices adjacent to a specified vertex within a geometry. More...
 
double area () const override
 Returns the planar, 2-dimensional area of the geometry. More...
 
QDomElement asGml2 (QDomDocument &doc, int precision=17, const QString &ns="gml", QgsAbstractGeometry::AxisOrder axisOrder=QgsAbstractGeometry::AxisOrder::XY) const override
 Returns a GML2 representation of the geometry. More...
 
QDomElement asGml3 (QDomDocument &doc, int precision=17, const QString &ns="gml", QgsAbstractGeometry::AxisOrder axisOrder=QgsAbstractGeometry::AxisOrder::XY) const override
 Returns a GML3 representation of the geometry. More...
 
json asJsonObject (int precision=17) const override
 Returns a json object representation of the geometry. More...
 
QString asKml (int precision=17) const override
 Returns a KML representation of the geometry. More...
 
QPainterPath asQPainterPath () const override
 Returns the geometry represented as a QPainterPath. More...
 
QByteArray asWkb (QgsAbstractGeometry::WkbFlags flags=QgsAbstractGeometry::WkbFlags()) const override
 Returns a WKB representation of the geometry. More...
 
QString asWkt (int precision=17) const override
 Returns a WKT representation of the geometry. More...
 
QgsAbstractGeometryboundary () const override
 Returns the closure of the combinatorial boundary of the geometry (ie the topological boundary of the geometry). More...
 
bool boundingBoxIntersects (const QgsBox3D &box3d) const override
 Returns true if the bounding box of this geometry intersects with a box3d. More...
 
void clear () override
 Clears the geometry, ie reset it to a null geometry. More...
 
QgsCurvePolygonclone () const override
 Clones the geometry by performing a deep copy. More...
 
double closestSegment (const QgsPoint &pt, QgsPoint &segmentPt, QgsVertexId &vertexAfter, int *leftOf=nullptr, double epsilon=4 *std::numeric_limits< double >::epsilon()) const override
 Searches for the closest segment of the geometry to a given point. More...
 
QgsCoordinateSequence coordinateSequence () const override
 Retrieves the sequence of geometries, rings and nodes. More...
 
QgsCurvePolygoncreateEmptyWithSameType () const override
 Creates a new geometry with the same class and same WKB type as the original and transfers ownership. More...
 
bool deleteVertex (QgsVertexId position) override
 Deletes a vertex within the geometry. More...
 
int dimension () const override
 Returns the inherent dimension of the geometry. More...
 
void draw (QPainter &p) const override
 Draws the geometry using the specified QPainter. More...
 
bool dropMValue () override
 Drops any measure values which exist in the geometry. More...
 
bool dropZValue () override
 Drops any z-dimensions which exist in the geometry. More...
 
QgsCurveexteriorRing ()
 Returns a non-const pointer to the curve polygon's exterior ring. More...
 
const QgsCurveexteriorRing () const
 Returns the curve polygon's exterior ring. More...
 
void filterVertices (const std::function< bool(const QgsPoint &) > &filter) override
 Filters the vertices from the geometry in place, removing any which do not return true for the filter function check. More...
 
void forceClockwise ()
 Forces the polygon to respect the exterior ring is clockwise, interior rings are counter-clockwise convention. More...
 
void forceCounterClockwise ()
 Forces the polygon to respect the exterior ring is counter-clockwise, interior rings are clockwise convention. More...
 
void forceRHR ()
 Forces the geometry to respect the Right-Hand-Rule, in which the area that is bounded by the polygon is to the right of the boundary. More...
 
bool fromWkb (QgsConstWkbPtr &wkb) override
 Sets the geometry from a WKB string. More...
 
bool fromWkt (const QString &wkt) override
 Sets the geometry from a WKT string. More...
 
bool fuzzyDistanceEqual (const QgsAbstractGeometry &other, double epsilon=1e-8) const override
 Performs fuzzy distance comparison between this geometry and other using an epsilon. More...
 
bool fuzzyEqual (const QgsAbstractGeometry &other, double epsilon=1e-8) const override
 Performs fuzzy comparison between this geometry and other using an epsilon. More...
 
QString geometryType () const override
 Returns a unique string representing the geometry type. More...
 
bool hasCurvedSegments () const override
 Returns true if the geometry contains curved segments. More...
 
bool insertVertex (QgsVertexId position, const QgsPoint &vertex) override
 Inserts a vertex into the geometry. More...
 
QgsCurveinteriorRing (int i)
 Retrieves an interior ring from the curve polygon. More...
 
const QgsCurveinteriorRing (int i) const
 Retrieves an interior ring from the curve polygon. More...
 
bool isEmpty () const override
 Returns true if the geometry is empty. More...
 
bool moveVertex (QgsVertexId position, const QgsPoint &newPos) override
 Moves a vertex within the geometry. More...
 
int nCoordinates () const override
 Returns the number of nodes contained in the geometry. More...
 
bool nextVertex (QgsVertexId &id, QgsPoint &vertex) const override
 Returns next vertex id and coordinates. More...
 
void normalize () final
 Reorganizes the geometry into a normalized form (or "canonical" form). More...
 
int numInteriorRings () const
 Returns the number of interior rings contained with the curve polygon. More...
 
bool operator!= (const QgsAbstractGeometry &other) const override
 
QgsCurvePolygonoperator= (const QgsCurvePolygon &p)
 
bool operator== (const QgsAbstractGeometry &other) const override
 
int partCount () const override
 Returns count of parts contained in the geometry. More...
 
double perimeter () const override
 Returns the planar, 2-dimensional perimeter of the geometry. More...
 
bool removeDuplicateNodes (double epsilon=4 *std::numeric_limits< double >::epsilon(), bool useZValues=false) override
 Removes duplicate nodes from the geometry, wherever removing the nodes does not result in a degenerate geometry. More...
 
bool removeInteriorRing (int ringIndex)
 Removes an interior ring from the polygon. More...
 
void removeInteriorRings (double minimumAllowedArea=-1)
 Removes the interior rings from the polygon. More...
 
void removeInvalidRings ()
 Removes any interior rings which are not valid from the polygon. More...
 
int ringCount (int part=0) const override
 Returns the number of rings of which this geometry is built. More...
 
double roundness () const
 Returns the roundness of the curve polygon. More...
 
QgsAbstractGeometrysegmentize (double tolerance=M_PI_2/90, SegmentationToleranceType toleranceType=MaximumAngle) const override
 Returns a geometry without curves. More...
 
double segmentLength (QgsVertexId startVertex) const override
 Returns the length of the segment of the geometry which begins at startVertex. More...
 
virtual void setExteriorRing (QgsCurve *ring)
 Sets the exterior ring of the polygon. More...
 
void setInteriorRings (const QVector< QgsCurve * > &rings)
 Sets all interior rings (takes ownership) More...
 
QgsCurvePolygonsnappedToGrid (double hSpacing, double vSpacing, double dSpacing=0, double mSpacing=0) const override
 Makes a new geometry with all the points or vertices snapped to the closest point of the grid. More...
 
QgsPolygonsurfaceToPolygon () const override
 Gets a polygon representation of this surface. More...
 
void swapXy () override
 Swaps the x and y coordinates from the geometry. More...
 
QgsCurvePolygontoCurveType () const override
 Returns the geometry converted to the more generic curve type. More...
 
virtual QgsPolygontoPolygon (double tolerance=M_PI_2/90, SegmentationToleranceType toleranceType=MaximumAngle) const
 Returns a new polygon geometry corresponding to a segmentized approximation of the curve. More...
 
void transform (const QgsCoordinateTransform &ct, Qgis::TransformDirection d=Qgis::TransformDirection::Forward, bool transformZ=false) override
 Transforms the geometry using a coordinate transform. More...
 
void transform (const QTransform &t, double zTranslate=0.0, double zScale=1.0, double mTranslate=0.0, double mScale=1.0) override
 Transforms the x and y components of the geometry using a QTransform object t. More...
 
bool transform (QgsAbstractGeometryTransformer *transformer, QgsFeedback *feedback=nullptr) override
 Transforms the vertices from the geometry in place, using the specified geometry transformer object. More...
 
void transformVertices (const std::function< QgsPoint(const QgsPoint &) > &transform) override
 Transforms the vertices from the geometry in place, applying the transform function to every vertex. More...
 
double vertexAngle (QgsVertexId vertex) const override
 Returns approximate rotation angle for a vertex. More...
 
QgsPoint vertexAt (QgsVertexId id) const override
 Returns the point corresponding to a specified vertex id. More...
 
int vertexCount (int part=0, int ring=0) const override
 Returns the number of vertices of which this geometry is built. More...
 
int vertexNumberFromVertexId (QgsVertexId id) const override
 Returns the vertex number corresponding to a vertex id. More...
 
int wkbSize (QgsAbstractGeometry::WkbFlags flags=QgsAbstractGeometry::WkbFlags()) const override
 Returns the length of the QByteArray returned by asWkb() More...
 
- Public Member Functions inherited from QgsSurface
QgsBox3D boundingBox3D () const override
 Returns the 3D bounding box for the geometry. More...
 
bool isValid (QString &error, Qgis::GeometryValidityFlags flags=Qgis::GeometryValidityFlags()) const override
 Checks validity of the geometry, and returns true if the geometry is valid. More...
 
- Public Member Functions inherited from QgsAbstractGeometry
 QgsAbstractGeometry ()=default
 Constructor for QgsAbstractGeometry. More...
 
 QgsAbstractGeometry (const QgsAbstractGeometry &geom)
 
virtual ~QgsAbstractGeometry ()=default
 
QString asJson (int precision=17)
 Returns a GeoJSON representation of the geometry as a QString. More...
 
virtual QgsRectangle boundingBox () const
 Returns the minimal bounding box for the geometry. More...
 
virtual bool boundingBoxIntersects (const QgsRectangle &rectangle) const
 Returns true if the bounding box of this geometry intersects with a rectangle. More...
 
virtual QgsPoint centroid () const
 Returns the centroid of the geometry. More...
 
virtual int compareTo (const QgsAbstractGeometry *other) const
 Comparator for sorting of geometry. More...
 
const_part_iterator const_parts_begin () const
 Returns STL-style iterator pointing to the const first part of the geometry. More...
 
const_part_iterator const_parts_end () const
 Returns STL-style iterator pointing to the imaginary const part after the last part of the geometry. More...
 
virtual bool convertTo (Qgis::WkbType type)
 Converts the geometry to a specified type. More...
 
bool is3D () const
 Returns true if the geometry is 3D and contains a z-value. More...
 
bool isMeasure () const
 Returns true if the geometry contains m values. More...
 
virtual double length () const
 Returns the planar, 2-dimensional length of the geometry. More...
 
QgsAbstractGeometryoperator= (const QgsAbstractGeometry &geom)
 
QgsGeometryPartIterator parts ()
 Returns Java-style iterator for traversal of parts of the geometry. More...
 
QgsGeometryConstPartIterator parts () const
 Returns Java-style iterator for traversal of parts of the geometry. More...
 
part_iterator parts_begin ()
 Returns STL-style iterator pointing to the first part of the geometry. More...
 
part_iterator parts_end ()
 Returns STL-style iterator pointing to the imaginary part after the last part of the geometry. More...
 
virtual const QgsAbstractGeometrysimplifiedTypeRef () const
 Returns a reference to the simplest lossless representation of this geometry, e.g. More...
 
QgsVertexIterator vertices () const
 Returns a read-only, Java-style iterator for traversal of vertices of all the geometry, including all geometry parts and rings. More...
 
vertex_iterator vertices_begin () const
 Returns STL-style iterator pointing to the first vertex of the geometry. More...
 
vertex_iterator vertices_end () const
 Returns STL-style iterator pointing to the imaginary vertex after the last vertex of the geometry. More...
 
Qgis::WkbType wkbType () const
 Returns the WKB type of the geometry. More...
 
QString wktTypeStr () const
 Returns the WKT type string of the geometry. More...
 

Static Public Member Functions

static const QgsCurvePolygoncast (const QgsAbstractGeometry *geom)
 Cast the geom to a QgsCurvePolygon. More...
 
- Static Public Member Functions inherited from QgsSurface
static const QgsSurfacecast (const QgsAbstractGeometry *geom)
 Cast the geom to a QgsSurface. More...
 

Protected Member Functions

QgsBox3D calculateBoundingBox3D () const override
 Calculates the minimal 3D bounding box for the geometry. More...
 
int childCount () const override
 Returns number of child geometries (for geometries with child geometries) or child points (for geometries without child geometries - i.e. More...
 
QgsAbstractGeometrychildGeometry (int index) const override
 Returns pointer to child geometry (for geometries with child geometries - i.e. More...
 
int compareToSameClass (const QgsAbstractGeometry *other) const final
 Compares to an other geometry of the same class, and returns a integer for sorting of the two geometries. More...
 
- Protected Member Functions inherited from QgsSurface
void clearCache () const override
 Clears any cached parameters associated with the geometry, e.g., bounding boxes. More...
 
- Protected Member Functions inherited from QgsAbstractGeometry
virtual QgsRectangle calculateBoundingBox () const
 Default calculator for the minimal bounding box for the geometry. More...
 
virtual QgsPoint childPoint (int index) const
 Returns point at index (for geometries without child geometries - i.e. More...
 
virtual bool hasChildGeometries () const
 Returns whether the geometry has any child geometries (false for point / curve, true otherwise) More...
 
void setZMTypeFromSubGeometry (const QgsAbstractGeometry *subggeom, Qgis::WkbType baseGeomType)
 Updates the geometry type based on whether sub geometries contain z or m values. More...
 
int sortIndex () const
 Returns the sort index for the geometry, used in the compareTo() method to compare geometries of different types. More...
 

Protected Attributes

std::unique_ptr< QgsCurvemExteriorRing
 
QVector< QgsCurve * > mInteriorRings
 
- Protected Attributes inherited from QgsSurface
QgsBox3D mBoundingBox
 
bool mHasCachedValidity = false
 
QString mValidityFailureReason
 
- Protected Attributes inherited from QgsAbstractGeometry
Qgis::WkbType mWkbType = Qgis::WkbType::Unknown
 

Additional Inherited Members

- Public Types inherited from QgsAbstractGeometry
enum  AxisOrder { XY = 0 , YX }
 Axis order for GML generation. More...
 
enum  SegmentationToleranceType { MaximumAngle = 0 , MaximumDifference }
 Segmentation tolerance as maximum angle or maximum difference between approximation and circle. More...
 
enum  WkbFlag { FlagExportTrianglesAsPolygons = 1 << 0 , FlagExportNanAsDoubleMin = 1 << 1 }
 WKB export flags. More...
 
typedef QFlags< WkbFlagWkbFlags
 

Detailed Description

Curve polygon geometry type.

Definition at line 34 of file qgscurvepolygon.h.

Constructor & Destructor Documentation

◆ QgsCurvePolygon() [1/2]

QgsCurvePolygon::QgsCurvePolygon ( )

Definition at line 36 of file qgscurvepolygon.cpp.

◆ QgsCurvePolygon() [2/2]

QgsCurvePolygon::QgsCurvePolygon ( const QgsCurvePolygon p)

Definition at line 63 of file qgscurvepolygon.cpp.

◆ ~QgsCurvePolygon()

QgsCurvePolygon::~QgsCurvePolygon ( )
override

Definition at line 41 of file qgscurvepolygon.cpp.

Member Function Documentation

◆ addInteriorRing()

void QgsCurvePolygon::addInteriorRing ( QgsCurve ring)
virtual

Adds an interior ring to the geometry (takes ownership)

Reimplemented in QgsTriangle, and QgsPolygon.

Definition at line 707 of file qgscurvepolygon.cpp.

◆ addMValue()

bool QgsCurvePolygon::addMValue ( double  mValue = 0)
overridevirtual

Adds a measure to the geometry, initialized to a preset value.

Parameters
mValueinitial m-value for all nodes
Returns
true on success
See also
dropMValue()
addZValue()

Implements QgsAbstractGeometry.

Definition at line 1261 of file qgscurvepolygon.cpp.

◆ addZValue()

bool QgsCurvePolygon::addZValue ( double  zValue = 0)
overridevirtual

Adds a z-dimension to the geometry, initialized to a preset value.

Parameters
zValueinitial z-value for all nodes
Returns
true on success
See also
dropZValue()
addMValue()

Implements QgsAbstractGeometry.

Definition at line 1244 of file qgscurvepolygon.cpp.

◆ adjacentVertices()

void QgsCurvePolygon::adjacentVertices ( QgsVertexId  vertex,
QgsVertexId previousVertex,
QgsVertexId nextVertex 
) const
overridevirtual

Returns the vertices adjacent to a specified vertex within a geometry.

Implements QgsAbstractGeometry.

Definition at line 1067 of file qgscurvepolygon.cpp.

◆ area()

double QgsCurvePolygon::area ( ) const
overridevirtual

Returns the planar, 2-dimensional area of the geometry.

Warning
QgsAbstractGeometry objects are inherently Cartesian/planar geometries, and the area returned by this method is calculated using strictly Cartesian mathematics. In contrast, the QgsDistanceArea class exposes methods for calculating the areas of geometries using geodesic calculations which account for the curvature of the Earth (or any other celestial body).
See also
length()
perimeter()

Reimplemented from QgsAbstractGeometry.

Definition at line 450 of file qgscurvepolygon.cpp.

◆ asGml2()

QDomElement QgsCurvePolygon::asGml2 ( QDomDocument &  doc,
int  precision = 17,
const QString &  ns = "gml",
QgsAbstractGeometry::AxisOrder  axisOrder = QgsAbstractGeometry::AxisOrder::XY 
) const
overridevirtual

Returns a GML2 representation of the geometry.

Parameters
docDOM document
precisionnumber of decimal places for coordinates
nsXML namespace
axisOrderAxis order for generated GML
See also
asWkb()
asWkt()
asGml3()
asJson()

Implements QgsAbstractGeometry.

Definition at line 325 of file qgscurvepolygon.cpp.

◆ asGml3()

QDomElement QgsCurvePolygon::asGml3 ( QDomDocument &  doc,
int  precision = 17,
const QString &  ns = "gml",
QgsAbstractGeometry::AxisOrder  axisOrder = QgsAbstractGeometry::AxisOrder::XY 
) const
overridevirtual

Returns a GML3 representation of the geometry.

Parameters
docDOM document
precisionnumber of decimal places for coordinates
nsXML namespace
axisOrderAxis order for generated GML
See also
asWkb()
asWkt()
asGml2()
asJson()

Implements QgsAbstractGeometry.

Reimplemented in QgsTriangle.

Definition at line 352 of file qgscurvepolygon.cpp.

◆ asJsonObject()

json QgsCurvePolygon::asJsonObject ( int  precision = 17) const
overridevirtual

Returns a json object representation of the geometry.

See also
asWkb()
asWkt()
asGml2()
asGml3()
asJson()
Note
not available in Python bindings
Since
QGIS 3.10

Reimplemented from QgsAbstractGeometry.

Definition at line 382 of file qgscurvepolygon.cpp.

◆ asKml()

QString QgsCurvePolygon::asKml ( int  precision = 17) const
overridevirtual

Returns a KML representation of the geometry.

Since
QGIS 3.12

Implements QgsAbstractGeometry.

Definition at line 408 of file qgscurvepolygon.cpp.

◆ asQPainterPath()

QPainterPath QgsCurvePolygon::asQPainterPath ( ) const
overridevirtual

Returns the geometry represented as a QPainterPath.

Warning
not all geometry subclasses can be represented by a QPainterPath, e.g. points and multipoint geometries will return an empty path.
Since
QGIS 3.16

Implements QgsAbstractGeometry.

Definition at line 833 of file qgscurvepolygon.cpp.

◆ asWkb()

QByteArray QgsCurvePolygon::asWkb ( QgsAbstractGeometry::WkbFlags  flags = QgsAbstractGeometry::WkbFlags()) const
overridevirtual

Returns a WKB representation of the geometry.

The optional flags argument specifies flags controlling WKB export behavior (since QGIS 3.14).

See also
asWkt
asGml2
asGml3
asJson()

Implements QgsAbstractGeometry.

Reimplemented in QgsPolygon.

Definition at line 268 of file qgscurvepolygon.cpp.

◆ asWkt()

QString QgsCurvePolygon::asWkt ( int  precision = 17) const
overridevirtual

Returns a WKT representation of the geometry.

Parameters
precisionnumber of decimal places for coordinates
See also
asWkb()
asGml2()
asGml3()
asJson()

Implements QgsAbstractGeometry.

Reimplemented in QgsPolygon.

Definition at line 287 of file qgscurvepolygon.cpp.

◆ boundary()

QgsAbstractGeometry * QgsCurvePolygon::boundary ( ) const
overridevirtual

Returns the closure of the combinatorial boundary of the geometry (ie the topological boundary of the geometry).

For instance, a polygon geometry will have a boundary consisting of the linestrings for each ring in the polygon.

Returns
boundary for geometry. May be nullptr for some geometry types.

Implements QgsAbstractGeometry.

Reimplemented in QgsTriangle, and QgsPolygon.

Definition at line 519 of file qgscurvepolygon.cpp.

◆ boundingBoxIntersects()

bool QgsCurvePolygon::boundingBoxIntersects ( const QgsBox3D box3d) const
overridevirtual

Returns true if the bounding box of this geometry intersects with a box3d.

Since this test only considers the bounding box of the geometry, is is very fast to calculate and handles invalid geometries.

Since
QGIS 3.34

Reimplemented from QgsAbstractGeometry.

Definition at line 607 of file qgscurvepolygon.cpp.

◆ calculateBoundingBox3D()

QgsBox3D QgsCurvePolygon::calculateBoundingBox3D ( ) const
overrideprotectedvirtual

Calculates the minimal 3D bounding box for the geometry.

See also
calculateBoundingBox()
Since
QGIS 3.34

Reimplemented from QgsAbstractGeometry.

Definition at line 245 of file qgscurvepolygon.cpp.

◆ cast()

static const QgsCurvePolygon* QgsCurvePolygon::cast ( const QgsAbstractGeometry geom)
inlinestatic

Cast the geom to a QgsCurvePolygon.

Should be used by qgsgeometry_cast<QgsCurvePolygon *>( geometry ).

Note
Not available in Python. Objects will be automatically be converted to the appropriate target type.

Definition at line 410 of file qgscurvepolygon.h.

◆ childCount()

int QgsCurvePolygon::childCount ( ) const
overrideprotectedvirtual

Returns number of child geometries (for geometries with child geometries) or child points (for geometries without child geometries - i.e.

curve / point)

Note
used for vertex_iterator implementation

Reimplemented from QgsAbstractGeometry.

Definition at line 1379 of file qgscurvepolygon.cpp.

◆ childGeometry()

QgsAbstractGeometry * QgsCurvePolygon::childGeometry ( int  index) const
overrideprotectedvirtual

Returns pointer to child geometry (for geometries with child geometries - i.e.

geom. collection / polygon)

Note
used for vertex_iterator implementation

Reimplemented from QgsAbstractGeometry.

Definition at line 1384 of file qgscurvepolygon.cpp.

◆ clear()

void QgsCurvePolygon::clear ( )
overridevirtual

Clears the geometry, ie reset it to a null geometry.

Implements QgsAbstractGeometry.

Reimplemented in QgsTriangle, and QgsPolygon.

Definition at line 107 of file qgscurvepolygon.cpp.

◆ clone()

QgsCurvePolygon * QgsCurvePolygon::clone ( ) const
overridevirtual

Clones the geometry by performing a deep copy.

Implements QgsAbstractGeometry.

Reimplemented in QgsTriangle, and QgsPolygon.

Definition at line 102 of file qgscurvepolygon.cpp.

◆ closestSegment()

double QgsCurvePolygon::closestSegment ( const QgsPoint pt,
QgsPoint segmentPt,
QgsVertexId vertexAfter,
int *  leftOf = nullptr,
double  epsilon = 4 *std::numeric_limits< double >::epsilon() 
) const
overridevirtual

Searches for the closest segment of the geometry to a given point.

Parameters
ptspecifies the point to find closest segment to
segmentPtstorage for the closest point within the geometry
vertexAfterstorage for the ID of the vertex at the end of the closest segment
leftOfindicates whether the point lies on the left side of the geometry (-1 if point is to the left of the geometry, +1 if the point is to the right of the geometry, or 0 for cases where left/right could not be determined, e.g. point exactly on a line) false if point is to right of segment)
epsilonepsilon for segment snapping
Returns
squared distance to closest segment or negative value on error

Implements QgsAbstractGeometry.

Definition at line 983 of file qgscurvepolygon.cpp.

◆ compareToSameClass()

int QgsCurvePolygon::compareToSameClass ( const QgsAbstractGeometry other) const
finalprotectedvirtual

Compares to an other geometry of the same class, and returns a integer for sorting of the two geometries.

Note
The actual logic for the sorting is an internal detail only and is subject to change between QGIS versions. The result should only be used for direct comparison of geometries and not stored for later use.
Since
QGIS 3.20

Implements QgsAbstractGeometry.

Definition at line 1392 of file qgscurvepolygon.cpp.

◆ coordinateSequence()

QgsCoordinateSequence QgsCurvePolygon::coordinateSequence ( ) const
overridevirtual

Retrieves the sequence of geometries, rings and nodes.

Returns
coordinate sequence

Implements QgsAbstractGeometry.

Definition at line 903 of file qgscurvepolygon.cpp.

◆ createEmptyWithSameType()

QgsCurvePolygon * QgsCurvePolygon::createEmptyWithSameType ( ) const
overridevirtual

Creates a new geometry with the same class and same WKB type as the original and transfers ownership.

To create it, the geometry is default constructed and then the WKB is changed.

See also
clone()

Implements QgsAbstractGeometry.

Reimplemented in QgsTriangle, and QgsPolygon.

Definition at line 46 of file qgscurvepolygon.cpp.

◆ deleteVertex()

bool QgsCurvePolygon::deleteVertex ( QgsVertexId  position)
overridevirtual

Deletes a vertex within the geometry.

Parameters
positionvertex id for vertex to delete
Returns
true if delete was successful
See also
insertVertex
moveVertex

Implements QgsAbstractGeometry.

Reimplemented in QgsTriangle.

Definition at line 1134 of file qgscurvepolygon.cpp.

◆ dimension()

int QgsCurvePolygon::dimension ( ) const
overridevirtual

Returns the inherent dimension of the geometry.

For example, this is 0 for a point geometry, 1 for a linestring and 2 for a polygon.

Implements QgsAbstractGeometry.

Definition at line 58 of file qgscurvepolygon.cpp.

◆ draw()

void QgsCurvePolygon::draw ( QPainter &  p) const
overridevirtual

Draws the geometry using the specified QPainter.

Parameters
pdestination QPainter

Implements QgsAbstractGeometry.

Definition at line 853 of file qgscurvepolygon.cpp.

◆ dropMValue()

bool QgsCurvePolygon::dropMValue ( )
overridevirtual

Drops any measure values which exist in the geometry.

Returns
true if m-values were present and have been removed
See also
addMValue()
dropZValue()

Implements QgsAbstractGeometry.

Definition at line 1294 of file qgscurvepolygon.cpp.

◆ dropZValue()

bool QgsCurvePolygon::dropZValue ( )
overridevirtual

Drops any z-dimensions which exist in the geometry.

Returns
true if Z values were present and have been removed
See also
addZValue()
dropMValue()

Implements QgsAbstractGeometry.

Definition at line 1278 of file qgscurvepolygon.cpp.

◆ exteriorRing() [1/2]

QgsCurve* QgsCurvePolygon::exteriorRing ( )
inline

Returns a non-const pointer to the curve polygon's exterior ring.

Ownership stays with this QgsCurve.

See also
interiorRing()
Note
Not available in Python.
Since
QGIS 3.20

Definition at line 181 of file qgscurvepolygon.h.

◆ exteriorRing() [2/2]

const QgsCurve* QgsCurvePolygon::exteriorRing ( ) const
inline

Returns the curve polygon's exterior ring.

See also
interiorRing()

Definition at line 168 of file qgscurvepolygon.h.

◆ filterVertices()

void QgsCurvePolygon::filterVertices ( const std::function< bool(const QgsPoint &) > &  filter)
overridevirtual

Filters the vertices from the geometry in place, removing any which do not return true for the filter function check.

Has no meaning when called on a single point geometry.

Depending on the filter used, this may result in an invalid geometry.

Note
Not available in Python bindings
Since
QGIS 3.2

Reimplemented from QgsAbstractGeometry.

Definition at line 1355 of file qgscurvepolygon.cpp.

◆ forceClockwise()

void QgsCurvePolygon::forceClockwise ( )

Forces the polygon to respect the exterior ring is clockwise, interior rings are counter-clockwise convention.

This convention is used primarily by ESRI software.

See also
forceCounterClockwise()
Since
QGIS 3.24

Definition at line 780 of file qgscurvepolygon.cpp.

◆ forceCounterClockwise()

void QgsCurvePolygon::forceCounterClockwise ( )

Forces the polygon to respect the exterior ring is counter-clockwise, interior rings are clockwise convention.

This convention matches the OGC Simple Features specification.

See also
forceClockwise()
Since
QGIS 3.24

Definition at line 807 of file qgscurvepolygon.cpp.

◆ forceRHR()

void QgsCurvePolygon::forceRHR ( )

Forces the geometry to respect the Right-Hand-Rule, in which the area that is bounded by the polygon is to the right of the boundary.

In particular, the exterior ring is oriented in a clockwise direction and the interior rings in a counter-clockwise direction.

Warning
Due to the conflicting definitions of the right-hand-rule in general use, it is recommended to use the explicit forceClockwise() or forceCounterClockwise() methods instead.
See also
forceClockwise()
forceCounterClockwise()
Since
QGIS 3.6

Definition at line 775 of file qgscurvepolygon.cpp.

◆ fromWkb()

bool QgsCurvePolygon::fromWkb ( QgsConstWkbPtr wkb)
overridevirtual

Sets the geometry from a WKB string.

After successful read the wkb argument will be at the position where the reading has stopped.

See also
fromWkt

Implements QgsAbstractGeometry.

Reimplemented in QgsTriangle, and QgsPolygon.

Definition at line 117 of file qgscurvepolygon.cpp.

◆ fromWkt()

bool QgsCurvePolygon::fromWkt ( const QString &  wkt)
overridevirtual

Sets the geometry from a WKT string.

See also
fromWkb

Implements QgsAbstractGeometry.

Reimplemented in QgsTriangle.

Definition at line 170 of file qgscurvepolygon.cpp.

◆ fuzzyDistanceEqual()

bool QgsCurvePolygon::fuzzyDistanceEqual ( const QgsAbstractGeometry other,
double  epsilon = 1e-8 
) const
inlineoverridevirtual

Performs fuzzy distance comparison between this geometry and other using an epsilon.

Traditionally, the comparison is done by examining the specific values (such as x and y) that define the location of vertices in the geometry. It focuses on the numerical differences or relationships between these values. On the other hand, comparing distances between points considers the actual spatial separation or length between the points, regardless of their coordinate values. This comparison involves measuring the distance between two points using formulas like the distance formula. Here, it's the "distance comparison" (fuzzyDistanceEqual).

See also
fuzzyEqual
QgsGeometryUtilsBase::fuzzyEqual
Since
QGIS 3.36

Implements QgsAbstractGeometry.

Definition at line 102 of file qgscurvepolygon.h.

◆ fuzzyEqual()

bool QgsCurvePolygon::fuzzyEqual ( const QgsAbstractGeometry other,
double  epsilon = 1e-8 
) const
inlineoverridevirtual

Performs fuzzy comparison between this geometry and other using an epsilon.

The comparison is done by examining the specific values (such as x and y) that define the location of vertices in the geometry.

See also
fuzzyDistanceEqual
QgsGeometryUtilsBase::fuzzyDistanceEqual
Since
QGIS 3.36

Implements QgsAbstractGeometry.

Definition at line 98 of file qgscurvepolygon.h.

◆ geometryType()

QString QgsCurvePolygon::geometryType ( ) const
overridevirtual

Returns a unique string representing the geometry type.

See also
wkbType
wktTypeStr

Implements QgsAbstractGeometry.

Reimplemented in QgsTriangle, and QgsPolygon.

Definition at line 53 of file qgscurvepolygon.cpp.

◆ hasCurvedSegments()

bool QgsCurvePolygon::hasCurvedSegments ( ) const
overridevirtual

Returns true if the geometry contains curved segments.

Reimplemented from QgsAbstractGeometry.

Definition at line 1179 of file qgscurvepolygon.cpp.

◆ insertVertex()

bool QgsCurvePolygon::insertVertex ( QgsVertexId  position,
const QgsPoint vertex 
)
overridevirtual

Inserts a vertex into the geometry.

Parameters
positionvertex id for position of inserted vertex
vertexvertex to insert
Returns
true if insert was successful
See also
moveVertex
deleteVertex

Implements QgsAbstractGeometry.

Reimplemented in QgsTriangle.

Definition at line 1086 of file qgscurvepolygon.cpp.

◆ interiorRing() [1/2]

QgsCurve* QgsCurvePolygon::interiorRing ( int  i)
inline

Retrieves an interior ring from the curve polygon.

The first interior ring has index 0.

See also
numInteriorRings()
exteriorRing()
Note
Not available in Python.
Since
QGIS 3.20

Definition at line 211 of file qgscurvepolygon.h.

◆ interiorRing() [2/2]

const QgsCurve* QgsCurvePolygon::interiorRing ( int  i) const
inline

Retrieves an interior ring from the curve polygon.

The first interior ring has index 0.

See also
numInteriorRings()
exteriorRing()

Definition at line 194 of file qgscurvepolygon.h.

◆ isEmpty()

bool QgsCurvePolygon::isEmpty ( ) const
overridevirtual

Returns true if the geometry is empty.

Reimplemented from QgsAbstractGeometry.

Definition at line 975 of file qgscurvepolygon.cpp.

◆ moveVertex()

bool QgsCurvePolygon::moveVertex ( QgsVertexId  position,
const QgsPoint newPos 
)
overridevirtual

Moves a vertex within the geometry.

Parameters
positionvertex id for vertex to move
newPosnew position of vertex
Returns
true if move was successful
See also
insertVertex
deleteVertex

Implements QgsAbstractGeometry.

Reimplemented in QgsTriangle.

Definition at line 1112 of file qgscurvepolygon.cpp.

◆ nCoordinates()

int QgsCurvePolygon::nCoordinates ( ) const
overridevirtual

Returns the number of nodes contained in the geometry.

Reimplemented from QgsAbstractGeometry.

Definition at line 923 of file qgscurvepolygon.cpp.

◆ nextVertex()

bool QgsCurvePolygon::nextVertex ( QgsVertexId id,
QgsPoint vertex 
) const
overridevirtual

Returns next vertex id and coordinates.

Parameters
idinitial value should be the starting vertex id. The next vertex id will be stored in this variable if found.
vertexcontainer for found node
Returns
false if at end

Implements QgsAbstractGeometry.

Definition at line 995 of file qgscurvepolygon.cpp.

◆ normalize()

void QgsCurvePolygon::normalize ( )
finalvirtual

Reorganizes the geometry into a normalized form (or "canonical" form).

Polygon rings will be rearranged so that their starting vertex is the lower left and ring orientation follows the right hand rule, collections are ordered by geometry type, and other normalization techniques are applied. The resultant geometry will be geometrically equivalent to the original geometry.

Since
QGIS 3.20

Implements QgsAbstractGeometry.

Definition at line 429 of file qgscurvepolygon.cpp.

◆ numInteriorRings()

int QgsCurvePolygon::numInteriorRings ( ) const
inline

Returns the number of interior rings contained with the curve polygon.

See also
interiorRing()

Definition at line 158 of file qgscurvepolygon.h.

◆ operator!=()

bool QgsCurvePolygon::operator!= ( const QgsAbstractGeometry other) const
inlineoverridevirtual

Implements QgsAbstractGeometry.

Reimplemented in QgsTriangle.

Definition at line 111 of file qgscurvepolygon.h.

◆ operator=()

QgsCurvePolygon & QgsCurvePolygon::operator= ( const QgsCurvePolygon p)

Definition at line 83 of file qgscurvepolygon.cpp.

◆ operator==()

bool QgsCurvePolygon::operator== ( const QgsAbstractGeometry other) const
inlineoverridevirtual

Implements QgsAbstractGeometry.

Reimplemented in QgsTriangle.

Definition at line 106 of file qgscurvepolygon.h.

◆ partCount()

int QgsCurvePolygon::partCount ( ) const
overridevirtual

Returns count of parts contained in the geometry.

See also
vertexCount
ringCount

Implements QgsAbstractGeometry.

Definition at line 1223 of file qgscurvepolygon.cpp.

◆ perimeter()

double QgsCurvePolygon::perimeter ( ) const
overridevirtual

Returns the planar, 2-dimensional perimeter of the geometry.

Warning
QgsAbstractGeometry objects are inherently Cartesian/planar geometries, and the perimeter returned by this method is calculated using strictly Cartesian mathematics. In contrast, the QgsDistanceArea class exposes methods for calculating the perimeters of geometries using geodesic calculations which account for the curvature of the Earth (or any other celestial body).
See also
area()
length()

Reimplemented from QgsAbstractGeometry.

Definition at line 478 of file qgscurvepolygon.cpp.

◆ removeDuplicateNodes()

bool QgsCurvePolygon::removeDuplicateNodes ( double  epsilon = 4 *std::numeric_limits< double >::epsilon(),
bool  useZValues = false 
)
overridevirtual

Removes duplicate nodes from the geometry, wherever removing the nodes does not result in a degenerate geometry.

The epsilon parameter specifies the tolerance for coordinates when determining that vertices are identical.

By default, z values are not considered when detecting duplicate nodes. E.g. two nodes with the same x and y coordinate but different z values will still be considered duplicate and one will be removed. If useZValues is true, then the z values are also tested and nodes with the same x and y but different z will be maintained.

Note that duplicate nodes are not tested between different parts of a multipart geometry. E.g. a multipoint geometry with overlapping points will not be changed by this method.

The function will return true if nodes were removed, or false if no duplicate nodes were found.

Implements QgsAbstractGeometry.

Definition at line 576 of file qgscurvepolygon.cpp.

◆ removeInteriorRing()

bool QgsCurvePolygon::removeInteriorRing ( int  ringIndex)

Removes an interior ring from the polygon.

The first interior ring has index 0. The corresponding ring is removed from the polygon and deleted. If a ring was successfully removed the function will return true. It is not possible to remove the exterior ring using this method.

See also
removeInteriorRings()

Definition at line 727 of file qgscurvepolygon.cpp.

◆ removeInteriorRings()

void QgsCurvePolygon::removeInteriorRings ( double  minimumAllowedArea = -1)

Removes the interior rings from the polygon.

If the minimumAllowedArea parameter is specified then only rings smaller than this minimum area will be removed.

See also
removeInteriorRing()

Definition at line 738 of file qgscurvepolygon.cpp.

◆ removeInvalidRings()

void QgsCurvePolygon::removeInvalidRings ( )

Removes any interior rings which are not valid from the polygon.

For example, this removes unclosed rings and rings with less than 4 vertices.

Definition at line 756 of file qgscurvepolygon.cpp.

◆ ringCount()

int QgsCurvePolygon::ringCount ( int  part = 0) const
overridevirtual

Returns the number of rings of which this geometry is built.

Implements QgsAbstractGeometry.

Definition at line 1218 of file qgscurvepolygon.cpp.

◆ roundness()

double QgsCurvePolygon::roundness ( ) const

Returns the roundness of the curve polygon.

The returned value is between 0 and 1.

Since
QGIS 3.24

Definition at line 492 of file qgscurvepolygon.cpp.

◆ segmentize()

QgsAbstractGeometry * QgsCurvePolygon::segmentize ( double  tolerance = M_PI_2 / 90,
SegmentationToleranceType  toleranceType = MaximumAngle 
) const
overridevirtual

Returns a geometry without curves.

Caller takes ownership

Parameters
tolerancesegmentation tolerance
toleranceTypemaximum segmentation angle or maximum difference between approximation and curve

Reimplemented from QgsAbstractGeometry.

Definition at line 1196 of file qgscurvepolygon.cpp.

◆ segmentLength()

double QgsCurvePolygon::segmentLength ( QgsVertexId  startVertex) const
overridevirtual

Returns the length of the segment of the geometry which begins at startVertex.

Warning
QgsAbstractGeometry objects are inherently Cartesian/planar geometries, and the lengths returned by this method are calculated using strictly Cartesian mathematics.

Implements QgsAbstractGeometry.

Definition at line 1233 of file qgscurvepolygon.cpp.

◆ setExteriorRing()

void QgsCurvePolygon::setExteriorRing ( QgsCurve ring)
virtual

Sets the exterior ring of the polygon.

The CurvePolygon type will be updated to match the dimensionality of the exterior ring. For instance, setting a 2D exterior ring on a 3D CurvePolygon will drop the z dimension from the CurvePolygon and all interior rings.

Parameters
ringnew exterior ring. Ownership is transferred to the CurvePolygon.
See also
setInteriorRings()
exteriorRing()

Reimplemented in QgsTriangle, and QgsPolygon.

Definition at line 660 of file qgscurvepolygon.cpp.

◆ setInteriorRings()

void QgsCurvePolygon::setInteriorRings ( const QVector< QgsCurve * > &  rings)

Sets all interior rings (takes ownership)

Definition at line 694 of file qgscurvepolygon.cpp.

◆ snappedToGrid()

QgsCurvePolygon * QgsCurvePolygon::snappedToGrid ( double  hSpacing,
double  vSpacing,
double  dSpacing = 0,
double  mSpacing = 0 
) const
overridevirtual

Makes a new geometry with all the points or vertices snapped to the closest point of the grid.

Ownership is transferred to the caller.

If the gridified geometry could not be calculated nullptr will be returned. It may generate an invalid geometry (in some corner cases). It can also be thought as rounding the edges and it may be useful for removing errors.

Example:

geometry.snappedToGrid(1, 1)

In this case we use a 2D grid of 1x1 to gridify. In this case, it can be thought like rounding the x and y of all the points/vertices to full units (remove all decimals).

Parameters
hSpacingHorizontal spacing of the grid (x axis). 0 to disable.
vSpacingVertical spacing of the grid (y axis). 0 to disable.
dSpacingDepth spacing of the grid (z axis). 0 (default) to disable.
mSpacingCustom dimension spacing of the grid (m axis). 0 (default) to disable.

Implements QgsAbstractGeometry.

Definition at line 542 of file qgscurvepolygon.cpp.

◆ surfaceToPolygon()

QgsPolygon * QgsCurvePolygon::surfaceToPolygon ( ) const
overridevirtual

Gets a polygon representation of this surface.

Ownership is transferred to the caller.

Implements QgsSurface.

Reimplemented in QgsTriangle, and QgsPolygon.

Definition at line 501 of file qgscurvepolygon.cpp.

◆ swapXy()

void QgsCurvePolygon::swapXy ( )
overridevirtual

Swaps the x and y coordinates from the geometry.

This can be used to repair geometries which have accidentally had their latitude and longitude coordinates reversed.

Since
QGIS 3.2

Implements QgsAbstractGeometry.

Definition at line 1310 of file qgscurvepolygon.cpp.

◆ toCurveType()

QgsCurvePolygon * QgsCurvePolygon::toCurveType ( ) const
overridevirtual

Returns the geometry converted to the more generic curve type.

E.g. QgsLineString -> QgsCompoundCurve, QgsPolygon -> QgsCurvePolygon, QgsMultiLineString -> QgsMultiCurve, QgsMultiPolygon -> QgsMultiSurface

Returns
the converted geometry. Caller takes ownership

Implements QgsAbstractGeometry.

Reimplemented in QgsTriangle, and QgsPolygon.

Definition at line 1321 of file qgscurvepolygon.cpp.

◆ toPolygon()

QgsPolygon * QgsCurvePolygon::toPolygon ( double  tolerance = M_PI_2 / 90,
SegmentationToleranceType  toleranceType = MaximumAngle 
) const
virtual

Returns a new polygon geometry corresponding to a segmentized approximation of the curve.

Parameters
tolerancesegmentation tolerance
toleranceTypemaximum segmentation angle or maximum difference between approximation and curve

Definition at line 640 of file qgscurvepolygon.cpp.

◆ transform() [1/3]

void QgsCurvePolygon::transform ( const QgsCoordinateTransform ct,
Qgis::TransformDirection  d = Qgis::TransformDirection::Forward,
bool  transformZ = false 
)
overridevirtual

Transforms the geometry using a coordinate transform.

Parameters
ctcoordinate transform
dtransformation direction
transformZset to true to also transform z coordinates. This requires that the z coordinates in the geometry represent height relative to the vertical datum of the source CRS (generally ellipsoidal heights) and are expressed in its vertical units (generally meters). If false, then z coordinates will not be changed by the transform.

Implements QgsAbstractGeometry.

Definition at line 875 of file qgscurvepolygon.cpp.

◆ transform() [2/3]

void QgsCurvePolygon::transform ( const QTransform &  t,
double  zTranslate = 0.0,
double  zScale = 1.0,
double  mTranslate = 0.0,
double  mScale = 1.0 
)
overridevirtual

Transforms the x and y components of the geometry using a QTransform object t.

Optionally, the geometry's z values can be scaled via zScale and translated via zTranslate. Similarly, m-values can be scaled via mScale and translated via mTranslate.

Implements QgsAbstractGeometry.

Definition at line 889 of file qgscurvepolygon.cpp.

◆ transform() [3/3]

bool QgsCurvePolygon::transform ( QgsAbstractGeometryTransformer transformer,
QgsFeedback feedback = nullptr 
)
overridevirtual

Transforms the vertices from the geometry in place, using the specified geometry transformer object.

Depending on the transformer used, this may result in an invalid geometry.

The optional feedback argument can be used to cancel the transformation before it completes. If this is done, the geometry will be left in a semi-transformed state.

Returns
true if the geometry was successfully transformed.
Since
QGIS 3.18

Implements QgsAbstractGeometry.

Definition at line 1326 of file qgscurvepolygon.cpp.

◆ transformVertices()

void QgsCurvePolygon::transformVertices ( const std::function< QgsPoint(const QgsPoint &) > &  transform)
overridevirtual

Transforms the vertices from the geometry in place, applying the transform function to every vertex.

Depending on the transform used, this may result in an invalid geometry.

Transform functions are not permitted to alter the dimensionality of vertices. If a transform which adds (or removes) z/m values is desired, first call the corresponding addZValue() or addMValue() function to change the geometry's dimensionality and then transform.

Note
Not available in Python bindings
Since
QGIS 3.4

Reimplemented from QgsAbstractGeometry.

Definition at line 1367 of file qgscurvepolygon.cpp.

◆ vertexAngle()

double QgsCurvePolygon::vertexAngle ( QgsVertexId  vertex) const
overridevirtual

Returns approximate rotation angle for a vertex.

Usually average angle between adjacent segments.

Parameters
vertexthe vertex id
Returns
rotation in radians, clockwise from north

Implements QgsAbstractGeometry.

Definition at line 1201 of file qgscurvepolygon.cpp.

◆ vertexAt()

QgsPoint QgsCurvePolygon::vertexAt ( QgsVertexId  id) const
overridevirtual

Returns the point corresponding to a specified vertex id.

Implements QgsAbstractGeometry.

Definition at line 1228 of file qgscurvepolygon.cpp.

◆ vertexCount()

int QgsCurvePolygon::vertexCount ( int  part = 0,
int  ring = 0 
) const
overridevirtual

Returns the number of vertices of which this geometry is built.

Implements QgsAbstractGeometry.

Definition at line 1213 of file qgscurvepolygon.cpp.

◆ vertexNumberFromVertexId()

int QgsCurvePolygon::vertexNumberFromVertexId ( QgsVertexId  id) const
overridevirtual

Returns the vertex number corresponding to a vertex id.

The vertex numbers start at 0, so a return value of 0 corresponds to the first vertex.

Returns -1 if a corresponding vertex could not be found.

Implements QgsAbstractGeometry.

Definition at line 940 of file qgscurvepolygon.cpp.

◆ wkbSize()

int QgsCurvePolygon::wkbSize ( QgsAbstractGeometry::WkbFlags  flags = QgsAbstractGeometry::WkbFlags()) const
overridevirtual

Returns the length of the QByteArray returned by asWkb()

The optional flags argument specifies flags controlling WKB export behavior

Since
QGIS 3.16

Implements QgsAbstractGeometry.

Reimplemented in QgsPolygon.

Definition at line 254 of file qgscurvepolygon.cpp.

Member Data Documentation

◆ mExteriorRing

std::unique_ptr< QgsCurve > QgsCurvePolygon::mExteriorRing
protected

Definition at line 445 of file qgscurvepolygon.h.

◆ mInteriorRings

QVector<QgsCurve *> QgsCurvePolygon::mInteriorRings
protected

Definition at line 446 of file qgscurvepolygon.h.


The documentation for this class was generated from the following files: