Elenco cambiamenti per QGIS 3.8

image1

QGIS 3.8 brings an extensive list of new changes and a lot of polishing of existing features - the highlights of which we will try to cover here. As always can we remind you that QGIS is an open source project and if you are able to, consider supporting our work through donations, sponsorship or contributions to the code documentation, web site and so on.

Ringraziamenti

Vogliamo ringraziare gli sviluppatori, chi cura la documentazione, i tester e tutti coloro che hanno offerto volontariamente il proprio tempo e impegno (o finanziato altri per farlo). Da parte della comunità di QGIS, speriamo ti godrai questa versione! Se vorrai donare tempo, denaro o partecipare in altro modo per rendere QGIS migliore, visita il sito qgis.org e dacci una mano!

QGIS is supported by donors and sponsors. A current list of donors who have made financial contributions large and small to the project can be seen on our donors list. If you would like to become an official sustaining member, please visit our sustaining members page for details. Supporting QGIS helps us to fund our bi-annual developer meetings, maintain project infrastructure and fund bug fixing efforts. A complete list of current sustaining members is provided below - our very great thank you to all of our supporters!

QGIS è un Software Libero e non c’è alcun obbligo di pagare nulla per utilizzarlo - vogliamo infatti incoraggiare le persone di ogni parte del mondo ad usarlo, indipendentemente dalla propria situazione finanziaria o sociale - crediamo che mettere tutti nella condizione di utilizzare gli strumenti decisionali spaziali produrrà una società migliore per tutta l’umanità.

Strumenti Mappa

Feature: Force Cartesian Measurements when Measuring Distances/Areas

In 3.8, we added an option to the measurement tool which forces Cartesian measurements for distance or area measurements. Previously, the measurement tools always used ellipsoidal/geodesic area and distance calculations, but there’s occasions when this is not desirable and users require pure Cartesian calculations instead.

image2

Questa funzionalità è stata finanziata da Oslandia

Questa funzionalità è stata sviluppata da Loïc Bartoletti (Oslandia)

Interfaccia Utente

Funzionalità: Pulsamte Salva su Modello

While QGIS has offered support for Project Templates for many years, we enhanced this in 3.8 and made it much simpler for users to create new templates. Now, users can create a new template from their current project by selecting «Save To -> Templates» from the «Project» menu.

image3

Questa funzionalità è stata sviluppata da Matthias Kuhn (OPENGIS.ch)

Feature: Improved «Zoom to Native Resolution» behavior

We’ve improved the «Zoom to Native» action, so it now works correctly with tiled (e.g. WMTS/XYZ/ArcGIS MapServer) layers, by zooming to the closest native tile resolution. Additionally, we tweaked tile rendering so that pixel-perfect rendering occurs when the map is viewed at a native tile resolution. The result: super-crisp map renders when using tiled layer sources!

image4

Feature: Drag and Drop Layers to Map Layer widgets

To improve the usability of large QGIS projects, we now support direct drag and drop of layers from the project table of contents to any widget which asks for a map layer selection (e.g. Processing algorithms). For complex projects, locating a layer in the table of contents and dragging it is much easier then picking it from the flat map layer widget combo box!

Additionally, for Processing algorithms, layers can be dragged direct from the Browser panel to input layer choices.

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Simbologia

Feature: Multi-character strings for font markers

While QGIS has long offered support for rendering points using font-based character markers, we’ve enhanced this functionality in 3.8 and now offer the ability to render multi-character strings! And since we’re always aiming to make the QGIS application interface as user-friendly and pleasant to use as possible, we also took the opportunity to tweak the UI for font markers and squash a number of frustrating GUI issues which previous versions suffered from.

image5

Questa funzionalità è stata sviluppata da Mathieu Pellerin

Feature: Point Displacement label distance factor

Another addition to the new symbology features added in 3.8 is a brand new label distance factor control for Point Displacement markers. This option allows displaced marker labels to be placed at a distance based on the actual marker diagonal size instead of a fixed distance.

image6

Questa funzionalità è stata sviluppata da henrik

Feature: Hash Line symbol type

QGIS loves cartography, and we know you love making pretty maps! So we’ve added a brand-new line symbology option for «Hashed Lines». This line symbol type is designed to replicate the ArcGIS Hash Line symbol layer type, and allows for a repeating line segment to be drawn over the length of a feature (with a line-sub symbol used to render each individual segment).

All options available for the existing Marker Line symbol layer are also available for hash lines, - e.g. first/last vertex, mid points, regular intervals, data-defined intervals, etc. The hash line length and angle can also have data defined overrides, which are evaluated per-line segment, allowing for the hash line to change size and angle over the length of a single rendered feature.

image7

Questa funzionalità è stata finanziata da anonimi

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Feature: Average line angles for marker and hashed line symbology

In previous QGIS versions, when a marker line was rendered using interval or center point place placement, the symbol angles were determined by taking the exact line orientation at the position of the symbol. This often leads to undesirable rendering effects, where little «jaggies» or corners in lines which occur right at the position of the symbol cause the marker to be oriented at a very different angle to what the eye expects to see.

We want your maps to be as beautiful as possible, so in QGIS 3.8 the marker angle is instead calculated by averaging the line over a specified distance either side of the symbol. E.g. averaging the line angle over 4mm means we take the points along the line 2mm from either side of the symbol placement, and use these instead to calculate the line angle for that symbol. This has the effect of smoothing (or removing!) any tiny local deviations from the overall line direction, resulting in much nicer visual orientation of marker or hash lines.

Like all symbol settings, the average angle smoothing distance can be set using mm/pixels/map units/etc, and supports data-defined values. Closed rings also correctly consider wrapping around these average angles from the start/end vertex.

This option is available for both the marker line symbol and the new hash line symbol types.

image8

Questa funzionalità è stata finanziata da anonimi

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Feature: Offset settings for point pattern fill symbol layers

To round out the new symbology options we’ve added in 3.8, the Point Pattern Fill symbol type has a new setting allowing for offsetting the markers in the pattern by a preset (or data-defined!) amount. This opens the door for many styling possibilities which were not possible in earlier versions, and further increases our compatibility with converted ArcGIS symbol and layer styles.

image9

Questa funzionalità è stata sviluppata da Mathieu Pellerin

Feature: Live Effects Blur Radius is now hi-dpi friendly

QGIS 3.8 brings a highly-desired fix to layer effects” blurring radius (aka strength). In earlier QGIS versions, these blur settings did not take into account the DPI of the map render — resulting in inaccurate effects rendering when exporting canvases/layouts at high resolutions. In 3.8, this was fixed and high-resolution map exports now match the results shown on the map canvas and are completely resolution-independent.

Questa funzionalità è stata sviluppata da Mathieu Pellerin

Etichettatura

Feature: Geometry generators for labeling

This is a huge one! During the developer’s meeting in A Coruña, Matthias Kuhn took the opportunity to implement a frequently-asked-for feature in our labeling engine: Geometry Generator support.

Just like Geometry Generators for symbols, we now allow label paths and positions to be calculated using dynamically-evaluated geometry expressions. You can take advantage of the rich support for geometry processing which QGIS” expression engine exposes, and use this to do ALL sorts of pre-processing to your feature geometries before they are labelled. Want to place labels around the start or end point of linestring geometries? What about dynamically smoothing and simplifying the path used for labeling river features, based on the current map scale? How about buffering polygon objects inward by a percentage of their area, and then labeling around the perimeter of this shrunken area? Now, it’s ALL possible, thanks to the power of labeling geometry generators!

image10

Questa funzionalità è stata finanziata da QGIS user group switzerland

Questa funzionalità è stata sviluppata da Matthias Kuhn (OPENGIS.ch)

Feature: Label Map Tools now use click-click behavior

Like the other QGIS digitizing and map tools, the «Move Label» and «Rotate Label» tools now use the standard left-click-to-start edit, left-click-to-end behavior. Consistency is good!

Funzionalità 3D

Feature: Wide lines and polygon edge highlighting

Like all recent QGIS releases, in version 3.8 we’ve significantly boosted QGIS” 3D rendering capabilities. New 3D rendering features include:

  • Configurable line width (in screen units) for «simple» 3D lines (in previous versions they were always 1px wide)

  • Optional highlighting of edges of 3D polygons

image11

Questa funzionalità è stata finanziata da Andreas Neumann

Questa funzionalità è stata sviluppata da Martin Dobias (Lutra Consulting)

Funzionalità: Esporta animazioni 3D

Another exciting change we’ve introduced in QGIS 3.8 is the ability to export your 3D animations! These are exported as a series of png/jpg/… images, which can be easily merged into .avi or other standard video files (using external tools).

image12

Questa funzionalità è stata finanziata da Northumberland National Park Authority

Questa funzionalità è stata sviluppata da Peter Petrik (Lutra Consulting)

Feature: Terrain from online sources

With this new version 3.8 feature, you can now directly fetch terrains for your 3D scenes from online sources (e.g. tiles hosted on AWS). No more sourcing and preparing rasters with DEM, just enable this option and see beautiful 3D scenes out-of-the-box!

Questa funzionalità è stata finanziata da Crowdfunding: More QGIS 3D

Questa funzionalità è stata sviluppata da Martin Dobias (Lutra Consulting)

Feature: Configuration of field of view angle of camera

In QGIS 3.8, the field of view of the camera through which 3D scenes are rendered has gained a new configurable field of view settings.

image13

Questa funzionalità è stata sviluppata da Mathieu Pellerin

Espressioni

Feature: Order by support for expression aggregate and concatenation functions

Since certain aggregate and concatenation expressions require results in a certain order, we now allow control over the order features are added to the aggregate during expression evaluation.

E.g. concatenate("Station",concatenator:=',', order_by:="Station") will give a comma-separated list of station names in alphabetical order, rather than layer feature order.

image15

Questa funzionalità è stata finanziata da SMEC/SJ

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Feature: Simplified variant of «attribute» function

This improvement brings a second variant for the existing «attribute» function. The «attribute» function in previous QGIS releases required both a target feature and attribute name to be specified. The new version is much simpler, automatically using the current feature and only requiring an attribute name.

E.g.

Previous behavior:

attribute($currentfeature, 'name' ) -> returns value stored in “name” attribute for the current feature

Improved behavior:

attribute( 'name' ) -> returns the value stored in “name” attribute for the current feature

It’s just a faster shorthand version!

image16

Questa funzionalità è stata finanziata da North Road

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Feature: Retrieve vertices from the end of geometeries

We added negative index support to the point_n(), angle_at_vertex(), and distance_to_vertex() functions, allowing for retrieval of vertices counting backward from the end of a geometry.

image17

Questa funzionalità è stata sviluppata da Mathieu Pellerin

Novità: nuove funzioni per il calcolo delle espressioni

As always, a new QGIS release brings a bunch of new functions for use within QGIS” expression engine. These new functions add increased flexibility and power to the expression engine, and everywhere it’s used throughout QGIS. This round, we’ve added a set of new functions which make it super-easy to operate on file names and paths.

Questa funzionalità è stata sviluppata da Nyall Dawson di North Road:

  • base_file_name: Returns the base name of the file without the directory or file suffix.

  • file_exists: Restituisce vero se un file esiste

  • file_name: Restituisce il nome del file dal un percorso completo

  • file_path: Restituisce il sentiero/directory da un percorso completo di un file

  • file_size: Restituisce la dimensione di un file

  • file_suffix: Restituisce il suffisso/estensione di files

  • is_directory: Restituisce vero se il percorso di un file è una directory

  • is_file: Restituisce vero se il percorso di un file è un file

Nuove funzioni di espressione sviluppate da Mathieu Pellerin di iMHere Asia:

  • array_all: Restituisce vero se un array contiene tutti i valori di un specifico array.

  • concatenate_unique: Restituisce tutte le stringhe uniche tratte da un campo o da una espressione unite con un delimitatore.

image18

Feature: New aggregation method: concatenate_unique

We added a new function concatenate_unique() to the expression engine (and Processing’s «aggregate» algorithm) to support concatenating only unique values from a list or set of features.

image19

Questa funzionalità è stata sviluppata da Mathieu Pellerin

Digitalizzazione

Feature: Floating widget for advanced input next to cursor

To make the existing Advanced Digitizing tools easier to use, we added an option to show the current distance/angle/x/y values as a floating display next to the mouse cursor.

image20

Questa funzionalità è stata finanziata da Kanton Schaffhausen

Questa funzionalità è stata sviluppata da Olivier Dalang e OPENGIS.ch

Feature: Chained add vertex at the endpoint

In QGIS 3.0, we added the ability to extend an existing line feature by clicking a «+» indicator at the start or end of line features when using the node tool. Version 3.8 extends this functionality by allowing addition of more than one vertex using the «+» button.

image21

Questa funzionalità è stata finanziata da Kanton Schaffhausen

Questa funzionalità è stata sviluppata da Olivier Dalang e OPENGIS.ch

Novità: miglioramenti nell’editor dei vertici

Per questa versione abbiamo migliorato l’editor dei vertici in modo che ora si colleghino correttamente i vertici selezionati nella canvas con i vertici per la modifica manuale delle coordinate nella tabella.

image22

Questa funzionalità è stata finanziata da QGIS User Group Switzerland

Questa funzionalità è stata sviluppata da Denis Rouzaud, OPENGIS.ch

Moduli e Widget

Feature: Allow browsing feature list

arrows allow browsing the feature list in the attribute table in form view
the current edited feature can be highlighted and the map canvas automatically panned or zoomed

Feature: HTML Form Widget

Grazie alla generosa sponsorizzazione di A.R.P.A Piemonte (una delle agenzie ambientali regionali italiane) abbiamo sviluppato un nuovo widget che permette l’accesso ai valori dell’elemento anche attraverso le espressioni in un modulo (form) html.

image23

Questa funzionalità è stata finanziata da A.R.P.A. Piemonte

Questa funzionalità è stata sviluppata da Alessandro Pasotti

Feature: Form widgets custom background color

Thanks to the generous sponsorship by A.R.P.A Piemonte (one of the italian regional environmental agencies) we finally freed you from the boredom of gray backgrounds.

image24

Questa funzionalità è stata finanziata da A.R.P.A. Piemonte

Questa funzionalità è stata sviluppata da Alessandro Pasotti

Feature: Browse through features in the attribute table form view

We’ve added the possibility to browse through the attributes of features in a layer. This makes workflows for asset management a lot easier! You can:

  1. Define a filter

  2. Browse through all matching features

  3. Review and adjust

You can also pan and zoom to the geometry of the feature or highlight the current feature as you browse.

(This replaces the previous ItemBrowser plugin with equivalent inbuilt functionality.)

image25

Questa funzionalità è stata finanziata da regioDATA

Questa funzionalità è stata sviluppata da Denis Rouzaud, OPENGIS.ch

Processing

Feature: Add «Save layer styles into GeoPackage» option for Package Layers algorithm

QGIS loves GeoPackage, so it’s likely no surprise that every new QGIS version brings improvements to GeoPackage handling! In 3.8, we enhanced the «Package Layers» Processing algorithm so that it now allows embedding the current layer styles directly into the packaged layers!

image26

Questa funzionalità è stata finanziata da North Road

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Feature: Overlap Analysis

Questo nuovo algoritmo Processing calcola l’area e la copertura percentuale con cui gli elementi di un livello di input sono sovrapposti agli elementi di una selezione di livelli sovrapposti. Nuovi attributi vengono aggiunti al livello di output riportando l’area totale di sovrapposizione e la percentuale degli elementi in entrata sovrapposti da ciascuno dei livelli di sovrapposizione selezionati.

This is quite a common GIS task request, yet is full of traps for inexperienced users, and the amount of manual data work usually done by users to calculate these figures can often lead to mistakes and inaccurate results. We want to make spatial analysis as easy and foolproof as possible, so we’ve added Overlap Analysis as an inbuilt tool which allows this task to be done in a single step without risk of human error.

image27

Questa funzionalità è stata finanziata da North Road

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Feature: Allow rounding values in Extract Layer Extent

We’ve added a parameter to the Processing algorithm “Extract Layer Extent” to round the extent bounding box coordinates to a certain interval. While rounding, the bounding box will only ever be enlarged, to ensure it will always cover the input data set. (I.e. the x and y minimum coordinates are rounded down, and x and y maximum coordinates are rounded up).

image28

Questa funzionalità è stata sviluppata da Raymond Nijssen

Feature: New options for autofilling batch Processing

In QGIS 3.8 we moved the existing «double click column header» to fill values down functionality to a new «Auto fill» button in the Processing Batch dialog, making this feature much more user-discoverable (we suspect many users had no idea this handy shortcut even existed!). In addition, we’ve added TONS of new functionality to easily auto-populate the batch table. These include:

  • File or layer parameters can now be batch populated by searching for files in a directory with a matching filename pattern (including recursive searches!). Ever needed to auto convert 100s of Shapefiles from a set of folders? Now it’s easy to do!

  • An option to add calculated values from a QGIS expression, allowing complex range-based values to be added to the dialog (e.g. values from 100-1000, increasing by 50)

  • A «Calculate by Expression» option allows for updating existing batch table cells using the results of a QGIS expression. These expressions can freely utilise other parameter values from the input batch rows, making it easy to craft the exact output file name you desire based on the other columns values in a batch row.

image29

Questa funzionalità è stata finanziata da North Road

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Funzionalità: Genera tasselli raster XYZ

We’ve added a brand-new algorithm to generate raster «XYZ» tiles using the current QGIS project. Tile images can be saved as individual images in directory structure, or as a single file in the «MBTiles» format.

image30

Questa funzionalità è stata finanziata da Hansestadt Herford, SWK mbH, Datenbankgesellschaft mbH

Questa funzionalità è stata sviluppata da Lutra Consulting

Feature: Resurrection of the OTB provider

QGIS 3.8 brings back the OTB Processing provider, which was removed in the QGIS 3.0 update. The provider was updated to use all the new goodies which are available in Processing in QGIS 3, and is once again available out-of-the-box for all your imagery analysis requirements!

(Note that OTB is a third party dependency which must be manually installed by users. Instructions on installing OTB are available `here <https://gitlab.orfeo-toolbox.org/orfeotoolbox/qgis-otb-plugin#open-processing-settings>`__)

image31

Questa funzionalità è stata sviluppata da Rashad Kanavath

Feature: Expression variables for a model

We’ve added a new «Model Variables» dock panel to the model editor, allowing you to create and set custom expression variables for use in your Processing models. These variables are available anywhere expressions are evaluated within the model, so you can use them as input parameter values for child algorithms, within data-defined dynamic parameters, etc.

The prime use case here is for models which use a constant value throughout multiple steps within the model (e.g. @target_resolution: a target raster resolution, @max_simplification: a simplification value for input features coming from different sources, etc). Previously, you’d need to hunt down and replace these values in multiple places when you wanted to tweak them. By replacing them with variables in your model you only have a single place you need to edit these values when you want to adjust them!

Model variables are stored within an individual Processing model itself, and are not exposed outside of the model designer dialog.

image32

Questa funzionalità è stata finanziata da North Road

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Feature: Improved modeler UI

We’ve added numerous usability improvements to the Processing Graphical Modeler, including

  • The addition of helpful tooltips when hovering over model components

  • Algorithms and inputs connected to model components are highlighted as you hover the mouse over different parts of the model, making it much easier to visualise the model flow and connections inside complex models

  • Input parameter types are now shown in the title of the parameter definition dialog

  • The data type for numeric parameters may now be specified, allowing for integer-only inputs for models

Questa funzionalità è stata finanziata da North Road

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Feature: Flagging algorithms with known issues

By default, we now hide 3rd party algorithms with known issues from the Processing toolbox, helping you avoid frustration (or misleading results) when running these algorithms. A new setting in the Processing options screen allows these algorithms to be shown, but they will be highlighted in the toolbox with a warning icon. Use at your own risk!

Questa funzionalità è stata finanziata da North Road

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Feature: Raster Boolean logical OR/AND algorithms

In version 3.8 we’ve added new algorithms which calculate the boolean OR or AND for a set of input rasters. For AND, if all of the input rasters have a non-zero value for a pixel, that pixel will be set to 1 in the output raster, otherwise it will be set to 0. For OR, if ANY of the input rasters have a non-zero value for a pixel, that pixel will be set to 1 in the output raster, else 0.

A reference layer parameter allows you to specify an existing raster layer to use as a reference when creating the output raster. The output raster will have the same extent, CRS, and pixel dimensions as this layer.

By default, a nodata pixel in ANY of the input layers will result in a nodata pixel in the output raster. If you check the “Treat nodata values as false” option, then nodata inputs will be treated the same as a 0 input value.

These new algorithms make for much simpler raster boolean logic calculation, without the complexity of using the raster calculator. They are also dynamically scalable to any number of input rasters (unlike the raster calculator), so are much more flexible when used within your Processing models.

Questa funzionalità è stata finanziata da SMEC/SJ

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Feature: New input parameter types for Print Layouts and Print Layout Items

By adding new parameter types for Print Layouts and Print Layout items, we’ve opened up QGIS 3.8 to a whole new world of Processing algorithms which operate on print layouts. These new parameter types allow for creation of Processing algorithms and graphical models which prompt users to select a print layout and/or an item on the layout when run.

Questa funzionalità è stata finanziata da SMEC/SJ

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Feature: New parameter type for Map Scales

We’ve added a new parameter type specifically for map scales, QgsProcessingParameterScale. Scale values are evaluated using self.parameterAsDouble, which return the map scale denominator (matching the standard in other parts of the QGIS API).

Scale parameters are displayed to users using the standard QgsScaleWidget, which includes the combo box of predefined scales and a shortcut button to match the current map scale. The addition of this new parameter type allows you to create Processing algorithms and models which require a scale choice at run time.

Questa funzionalità è stata finanziata da SMEC/SJ

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Feature: Improved «point» parameter handling

We improved the workflow for algorithms with a «point» input parameter. When picking the point coordinate from a map you can now take advantage of QGIS snapping tools, allowing you to exactly match the point parameter to a feature’s boundary.

Questa funzionalità è stata finanziata da North Road

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Feature: New «Print Layout Map Extent to Layer» algorithm

Taking advantage of the new facilities for accessing Print Layouts in Processing, we added a new algorithm which creates a polygon layer containing the extent of a print layout map item. The output layer also includes handy attributes specifying the map size (in layout units), scale and rotation.

If you’ve ever wanted to create an advanced overview indicator, and the inbuilt layout tools haven’t sufficed — this new algorithm is for you!

image33

Questa funzionalità è stata finanziata da SMEC/SJ

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Feature: Add X/Y fields to layer

This new algorithm is a handy shortcut for adding X and Y (or latitude/longitude) fields to a point layer. You can even calculate the X/Y values using a different coordinate reference system from the layer (e.g. creating latitude/longitude fields for a layer in a projected CRS).

image34

Questa funzionalità è stata finanziata da SMEC/SJ

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Feature: «Join attributes by nearest» algorithm

You can now perform K-nearest neighbour joins from the Processing toolbox!

QGIS 3.8 brings a new algorithm which takes an input vector layer and creates a new vector layer with additional attributes in its attribute table. The additional attributes and their values are taken from a second vector layer, where features are joined by finding the closest features from each layer.

By default only the single nearest feature is joined, but optionally the join can use the n-nearest neighboring features instead. If a maximum distance is specified, then only features which are closer than this distance will be matched.

image35

Questa funzionalità è stata finanziata da North Road

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Feature: Grass r.geomorphon algorithm

The upstream GRASS team has been hard at work creating a new GRASS module for terrain analysis — «r.geomorphon». In 3.8 we expose their efforts via a new Processing tool, which calculates geomorphons (terrain forms) and associated geometry using a machine learning approach.

image36

Feature: GDAL pansharpening algorithm

Another third party tool which we’ve added to the Processing toolbox in QGIS 3.8 is the GDAL pansharpening tool. Now it’s easy to take advantage of this fast, powerful tool in your Processing analysis scripts and models.

image37

Questa funzionalità è stata sviluppata da Alexander Bruy

Feature: New fields prefix parameter for overlay algorithms

We’ve added overlay layer fields prefix parameter for the following algorithms:

  • intersection algorithm

  • line intersection algorithm

  • symmetrical difference algorithm

  • union algorithm

This can come in very handy to avoid arbitrary colliding field renaming when merging layers.

Questa funzionalità è stata sviluppata da Mathieu Pellerin

Browser

Feature: Direct access to sheets from XLSX/ODS files

QGIS 3.8 brings even more power to the browser panel, and now displays all sheets from spreadsheet files (e.g. Microsoft Excel and LibreOffice calc files) in the browser file tree.

image38

Questa funzionalità è stata finanziata da North Road

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Generale

Feature: QGIS projects inside geopackage files

Did we already say that QGIS loves GeoPackage? Need any more proof of this? Well, in QGIS 3.8, we’ve added to ability to store QGIS projects directly inside GeoPackage files! Now you can create a totally self-contained GeoPackage which embeds a QGIS Project AND all the data used by the project. (Let’s see Shapefiles match that one!)

image39

Questa funzionalità è stata finanziata da QCooperative

Questa funzionalità è stata sviluppata da Alessandro Pasotti

Feature: Much Improved Coordinate Transform Handling

Thanks to underlying work from the tireless PROJ and GDAL teams, QGIS now sports many huge improvements in geodetic and transformation capabilities! Highlights include:

  • The PROJ CRS database is now used to populate QGIS” CRS selection lists, removing the custom database we used in previous releases. This means that ALL responsibility for CRS definitions and updating these sit were they belong, upstream in the PROJ library – and consequently you can expect to see QGIS CRS definitions being a closer match to the official definitions, and newer CRS definitions will be added much faster than in previous releases.. This change also means we’ll be an exact match for projection handling as all other open-source geospatial tools which have completed the port to the latest PROJ version, such as GDAL 3.0.

  • We now rely entirely on PROJ’s wonderful logic for generating the best coordinate operation to transform between CRS pairs. This means (amongst other stuff), we correctly support complex things like operations which require a «pivot datum», e.g. transformation to and from the GDA2020 coordinate systems.

  • Instead of the older approach QGIS used for datum transformations (carrying around our own table of when grid shift files can be used), we now use PROJ to determine these. This considerably changes the user interface shown when a user has opted into selecting manually a transform to use when multiple transforms exist, and we now show a simplified list of available (and non-available) pathways.

  • We also use PROJ’s database to populate lists of available ellipsoids for use in distance and area calculations. This has cleaned up the ellipsoid choices considerably, and added many additional ellipsoid definitions as a result.

  • The UX for notifying users about issues in coordinate transforms is greatly improved, e.g. users are now alerted when a more accurate transform is possible, but not usable on their system (due to missing .GSB grid shift files). Wherever possible, we present users with direct download links to obtain these required/desired grid shift files. The intention here is to ensure users are informed when transforms can be improved, instead of silently falling back to less accurate options.

  • Users also now have the option of placing grid shift files in a «proj» folder under their QGIS user profile. This change means users can install grid shift files and make them available in QGIS without requiring administrative rights.

  • We’ve also completed a project which began back in the lead-up to 3.0, which ensures that project-specific transformation pathway settings are correctly respected EVERYWHERE a coordinate transform is performed. This also means we’re ready for the next stage in handling 4d temporal based coordinate transforms (when these start to land in 2020 and beyond).

A lot of this is only possible thanks to improvements in the underlying PROJ and GDAL libraries, which landed as a result of the GDAL «barn raising» effort. On the QGIS side, it was ONLY possible thanks to funding from the Australian ICSM.

Questa funzionalità è stata finanziata da ICSM

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Sorgenti Dati

Feature: postgres provider: add support for generated identity columns

Questa funzionalità è stata sviluppata da jef-n

Feature: String List support for compatible layers

QGIS 3.8 now fully supports disk-based layers with String List fields, allowing you to take advantage of QGIS” flexible handling of list field types with these formats.

Questa funzionalità è stata sviluppata da Mathieu Pellerin

Feature: Much Improved ArcGIS MapServer Handling

We rebuilt the ArcGIS MapServer provider, adding significant improvements over previous versions:

  • Tiled layers are now loaded progressively, with immediate feedback

  • We significantly optimised the provider, resulting in much faster map redraws

  • MapServer layers now correctly respect authentication settings and HTTP referrer settings.

  • «Nested» services are correctly shown in the QGIS browser panel

  • ImageServer services can be added using the provider

End result: MapServer layers are now silky smooth in QGIS!

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road) & Mathieu Pellerin (iMHere Asia)

Feature: SQL Server: handle v2 geometries, including curved and Z/M geometries

SQL Server users rejoice: QGIS now fully supports curved geometry types (and other «version 2» geometry fields)!

In past QGIS versions, the SQL Server provider would only handle version 1 type geometries, and could only show straight feature types. In 3.8, we’ve added full support for version 2 geometries. This change also allows full support for Z or M enabled geometry types! Additionally, we fixed several known issues with geography field types.

Questa funzionalità è stata sviluppata da Tamas Szekeres

Feature: WMS: Define one filter for several layers

Sometimes, you need to define the same filter for every selected layer when making a WMS request (e.g. when accessing user-specific data). In previous QGIS versions we had to define the filter using the format:

&FILTER=layer1:"column1" = 'value1';layer2:"column1" = 'value1';layer3:"column1" = 'value1'

With QGIS 3.8, we’ve simplified this, and now allow the filter format:

&FILTER=layer1,layer2,layer3:"column1" = 'value1'

Questa funzionalità è stata finanziata da VEOLIA

Questa funzionalità è stata sviluppata da Julien Cabieces (Oslandia)

Feature: Support for curves in DXF export

You can now export curved geometry layers to DXF format without segmentizing the features — no more loss of curves!

image41

Questa funzionalità è stata finanziata da Kanton Schaffhausen

Questa funzionalità è stata sviluppata da Jürgen Fischer in collaborazione con Matthias Kuhn

QGIS Server

Feature: Allow configuring size for GetLegendGraphics

For this release we improved how the legend for QGIS servers handles the size of symbols which are scaled by map units.
Whenever possible, the server will determine the legend size based on the map canvas and resolution. Even more, for cases where this information is not available in the GetLegend request, it is now possible to configure a default scale in the project, symbols in the legend will then be drawn in the size they will have when rendered at this scale.

Questa funzionalità è stata sviluppata da David Signer, OPENGIS.ch

Plugin

Feature: Support for plugin dependencies

In QGIS 3.8, we’ve introduced a long-sought-after feature for QGIS plugin developers: the ability to specify dependencies for your plugins.

To add a plugin dependancy, you can use the new metadata «plugin_dependencies». The format is a comma-separated list of PIP-like plugin names (with optional version). E.g:

plugin_dependencies=GeoCoding,IPyConsole==1.9

The example above will require:

  • Any version of GeoCoding

  • Version 1.9 of IPyConsole

When a plugin is installed, the metadata is parsed and a user will be prompted with a dialog listing the dependencies. The user can then decide what to do with the dependencies:

  • Installa

  • Upgrade/downgrade

  • Do nothing

image40

Questa funzionalità è stata finanziata da GISCE TI

Questa funzionalità è stata sviluppata da Alessandro Pasotti

Programmabilità

Feature: REGEXP SQL syntax support for spatialite provider and python connections

We’ve enabled REGEX to be used with the spatialite provider. (This comes in handy when setting filters!). We’ve also added support for this syntax via any python connections made through Qgis.utils’s «spatialite_connection» API - allowing you to use REGEXP in your SQL queries from within DB Manager.

Questa funzionalità è stata sviluppata da Mathieu Pellerin

Feature: Nearest Neighbour search in QgsSpatialIndex

We added API to allow accurate nearest neighbor search based on QgsGeometry to QgsGeometry searches via QgsSpatialIndex. In previous QGIS versions only point to geometry nearest neighbour searches were possible. But with this change, you can safely and accurately use QgsSpatialIndex to determine the nearest neighbours between any types of geometries.

Questa funzionalità è stata finanziata da North Road

Questa funzionalità è stata sviluppata da Nyall Dawson (North Road)

Notable Fixes

Feature: Bug fixes by Alessandro Pasotti

Bug Title

URL issues.qgis.org (if reported)

URL Commit (Github)

3.4 backport commit (GitHub)

Raster Calculator wrong results

#21405

fixed in master

QGIS server ignores custom rendering order when loading parent group

#21917

PR #9878

Fatto

WMS Client: GetFeatureInfo in JSON format doesn’t display numeric attribute values

#21735

PR #9879

Fatto

Crash when adding New Field to ShapeLayer

#22100

Priority in labelling not greyed out when data defined settings are enabled

#22077

Non valido

$length return bad value

#22105

works for me (and for everybody)

Relation reference widget wrong feature when «on map identification»

#22071

Map composer: «href» HTML attribute issue in PDF output

#22075

won’t fix

Issue exporting raster layer to Geopackage

#20848

PR #10036

Fatto

Create vector New shapefile POLYGON

#22107

non valido

«Export to PostgreSQL» python error if rather schema has an uppercase letter in its name

#22035

PR #10063

Relation reference widget wrong feature when «on map identification»

#22071

PR #10047

Fatto

DB Manger imports the wrong data

#22033

PR #10077

Fatto

qgis crash when filtering a layer with an attachment field

#21775

Fixed by Nyall

Raster calculator, abs() not working

#29824

PR #29965

Fatto

Valid file URL link fails in Identify window

#29879

PR #29967

Fatto

QgsProject.instance().clear() crashes QGIS when LayoutDesigner Window is open

#29821

PR #29968

Fatto

QGIS Server WFS DescribeFeatureType advertises double precision virtual fields as integer

#29767

PR #29970

Fatto

QGIS crahses when exporting a template

#29798

PR #29981

Fatto

Export atlas as image fail when expression filename contain dot

#29980

PR #29983

Fatto

Buttons to adjust marker size in the digitizing tab of the general settings dialog not work

#29987

PR #29991

Map Composer crashes QGIS when copying mixture of elements in page layout

#29747

PR #30017

Da fare

QGIS crashes with PostgreSQL views

#29673

cannot reproduce and cannot ask for feedback

Browser - «Project home» folder shortcut does not appear when a new project is saved

#29919

PR #30025

Da fare

Crash when calling QgsRasterHistogram.histogramVector

#29700

PR #30033

Fatto

Do not offer to «Import settings from Qgis2?» if no such settings exist

#30082

PR #30092

Fatto

In gpkg, query builder prevents autogenerate of pasted feature with same fid as hidden feature

#30062

PR #30096

Da fare

Drag and drop geopackage from filesystem into map misses vector layers, loses names for raster layers

#30050

PR #30098

Fatto

Qgis crashes when try to identify a layer with duplicated fields

#29937

PR #30100

Da fare

label properties will not saved to project files (buffer and background)

#29882

works for me on release-3_4 and master

Saving edits to a layer with JSON field throws an error

#30131

PR #30137

Risky?

Value relation widget settings lost on import of layer definition file

#30115

PR #30151

Risky?

Unable to add new features in QGIS for PostGIS table using sequence for gid. Data type serial: “integer overflow”

#30041

PR #30184

Fatto

Questa funzionalità è stata finanziata da QGIS.ORG donatori e sponsor

Questa funzionalità è stata sviluppata da Alessandro Pasotti

Feature: Bug fixes by Alexander Bruy

Bug Title

URL issues.qgis.org (if reported)

URL Commit (Github)

3.4 backport commit (GitHub)

v.net.distance - node cost column

#22013

PR #10060

Fatto

shapefile to raster conversion does not work

#21922

GRASS r.in.lidar.info, can only choose .txt not the intended .las

#21910

PR #10061

Fatto

SAGA OpenCV Image Analysis

#21746

SAGA «saga split rgb bands» tool is not inside any (SAGA) group of tools

#21849

PR #10062

Fatto

r.sun cannot be executed because it calls on two incompatible options

#21637

PR #10074

Fatto

i.segment (GRASS 7.4.2) only produces a Goodness Raster but no Segmented Raster

#20646

works fine in master and 3.4

Majority filter (SAGA) returns erroneous results if input is .tif

#22118

non valido

Processing batch process interface: no way to go back

#16893

PR #10080

Fatto

DB Manager rename PostGIS column error

#21425

PR #10082

not needed

Word wrapping not working in maptips

#21388

PR #10081

Fatto

Styles stored in QML files with same name as layer no longer auto loaded

#21691

PR #14660

Fatto

QGIS 3.4.6 crashed when I tried classifying a layer

#21693

PR #29951

Fatto

Fixed table not working under User defined filter (SAGA)

#29999

PR #30001

Fatto

DB Manager Versioning: _current view lacks primary key

#25888

PR #30045

Questa funzionalità è stata finanziata da QGIS.ORG donatori e sponsor

Questa funzionalità è stata sviluppata da Alexander Bruy

Feature: Bug fixes by Victor Olaya

Bug Title

URL issues.qgis.org (if reported)

URL Commit (Github)

3.4 backport commit (GitHub)

Processing «iterate» does not work anymore

#21524

PR #10078

parameter type error in SAGA Gaussian Filter

#21797

Commit

Distance matrix does not maintain data type and precision for Input Point Layer in Linear (N*k x 3)

#21501

Processing «Build virtual vector» now fails in certain cases

#21519

PR #10083

SAGA raster calculator loads more grids than selected when a sdat is supplied in XGRIDS

#22131

PR #10085

Export selected Objects generated line layer not selectable in graphical modeller

#21705

PR #10093

Batch processing error in r.mapcalc.simple

#29822

Help for algorithms not visible in modeller

#21536

Bug fixes related the batch interface, not linked to any bug report. They are regressions introduced in recent changes, that i found while working on another issue

PR #29948

PR #29950

Questa funzionalità è stata finanziata da QGIS.ORG donatori e sponsor

Questa funzionalità è stata sviluppata da Victor Olaya

Feature: Bug fixes by Even Rouault

Bug Title

URL issues.qgis.org (if reported)

URL Commit (Github)

3.4 backport commit (GitHub)

ENVI driver ignores «geo point» (GCP) metadata on reading

#1528

Commit

WFS GetFeature fails on TypeNames parameter

#21768

PR #29946

Fatto

Cannot load GPX file automatically after creating it QGIS 3.4.7 QGIS 3.6.2

#22005

PR #29947

Fatto

Impossibile creare la cache temporanea SpatiaLite

#29819

PR #29949

Fatto

PostGIS closed circle in Curved Polygon is not displayed

#29895

PR #30010

Fatto

Fix GeoJSON output of MultiPolygon/MultiSurface

PR #30012

PR #30012

Not needed

Multipatch features are not shown anymore

#29376

PR #30024

Fatto

Multiple issues and deadlocks with WFS

#29258

PR #30026

Fatto

WFS provider: Avoid dangling download progress dialog

PR #30039

PR #30039

Fatto

Questa funzionalità è stata finanziata da QGIS.ORG donatori e sponsor

Questa funzionalità è stata sviluppata da Even Rouault

Feature: Bug fixes by Denis Rouzaud

Bug Title

URL issues.qgis.org (if reported)

URL Commit (Github)

3.4 backport commit (GitHub)

issues in embedded layers

#29678

PR #9993 and PR #10004

Questa funzionalità è stata finanziata da QGIS.ORG donatori e sponsor

Questa funzionalità è stata sviluppata da Denis Rouzaud

Feature: Bug fixes by Peter Petrik

Bug Title

URL issues.qgis.org (if reported)

URL Commit (Github)

3.4 backport commit (GitHub)

Editing a GeoPackage feature with spaces in the field names can crash QGIS

#29630

PR #29997

Da fare

Crash on update pg layer

#29814

duplicate

N/A

XMDF file type missing from Madiera 3.4.5

#29381

non valido

N/A

Mesh calculator: crash when “All Selected Dataset Times” button clicked

#30003

PR #30005

N/A

Crash when editing fields

#29200

unable to replicate

N/A

Closing Vertex Edititor crashes the app

#30028

PR #30030

Da fare

Detached 3D view crash [macOS]

#29169

unable to replicate

Questa funzionalità è stata finanziata da QGIS.ORG donatori e sponsor

Questa funzionalità è stata sviluppata da Peter Petrik

Feature: Bug fixes by Loïc Bartoletti

Bug Title

URL issues.qgis.org (if reported)

URL Commit (Github)

3.4 backport commit (GitHub)

No snap when selecting point of rotation

#29706

duplicate / not a bug

Crashs when working with auxiliary storage label and data defined

#30078

unable to replicate

Improve the advanced digitizing by angle

#30133

not a bug

Fix reshape for snapped point with Z

PR #30108

Questa funzionalità è stata finanziata da QGIS.ORG donatori e sponsor

Questa funzionalità è stata sviluppata da Loïc Bartoletti